All Purpose Wallpaper Adhesive
All Purpose Wallpaper Adhesive.
Surface PreparationEnsure surfaces are clean, dry and free from dust. Treat areas where there is a high risk of mould growth with a quality fungicidal wash. Size absorbent surfaces before use and allow to dry completely before papering.
Mixing
For quantity of cold water to use see table below. Sprinkle contents into water, stirring quickly for 30 seconds to disperse. Stir again thoroughly after 3 minutes. The paste is then ready to use.
Pasting
Follow the wallpaper manufacturers instructions. Soak heavy and embossed papers until supple. Paste generously, particularly the edges, and do not overspread. Take care to keep the front surface of the paper free from paste, removing any splashes with cold water and a sponge.
| Application | Quantity of coldwater to use per sachet |
Approximate coverage |
| Normal wallpapers including woodchip | 12 pints | 8-10 rolls |
| Vinyl wallcoverings, washables & Novamura | 10 pints | 8 rolls |
| Blown vinyl wallcoverings | 10 pints | 8 rolls |
| Embossed papers (eg Anaglypta) | 8 pints | 4-5 rolls |
| Heavy embossed papers | 7 pints | 3.5-4 rolls |
| Non-woven lining paper | 7 pints | 3.5-4 rolls |
| Polystyrene tiles | 8 pints | 160 sq ft. |
| NB: The figures above are intended as a guide only. | ||
SSL 
