Zinsser Allcoat Exterior is a genuine low-maintenance exterior gloss-finished, water-borne coating, which rather unusually, can be applied to virtually all exterior surfaces without using a separate primer.
It's an ideal product for specifiers and building maintenance professionals, who need to reliably specify a high performance coating system on important exterior projects with lots of different surface types.
Use directly onto wood, plastics, uPVC, galvanised metal, cladding, concrete, brick, stone. Even directly over weathered coatings like bitumen, tar varnish or creosote. It offers fantastic adhesion, so will stick to glossy surfaces without any need to abrade them. (Note: Ferrous metals i.e. Iron/Steel which might rust etc. will however need to be primed with one of our a rust inhibiting primers first). Remove wax and degrease all surfaces using Grax-it, (or other suitable proprietory degreaser) to ensure adhesion of the coatings to the substrate. Don't use a bristle paint brush to apply, instead use a good quality synthetic paint brush like the excellent Fossa ViperTrim, which is lovely to use and will give you a good finish.
Zinsser Allcoat Exterior offers good moisture vapour permeability, which allows moisture to leave the substrate and pass through the coating film at higher rates, without blowing off the coating film. Quick drying times allow also it to be recoated in as little as 1 hour.
Zinsser Allcoat Exterior's water-borne formulation provides excellent resistance against cracking, blistering and flaking. The tough flexible finish is resistant to rain and severe weather and it offers excellent colour retention, so that strong colours remain bright and beautiful for longer.
It's available off the shelf in white and black, and we can also tint 1litre, 2.5 litre and 5 litre sizes only to ANY British Standard, RAL, Little Greene, Farrow & Ball or NCS colour as a customised order. Just select the 'mixed colour' option from the drop-down box, then send us an email containing the colour you would like your AllCoat to be tinted to. (Please note: mixed colours are customised according to your colour requirements, cancellation restrictions apply).
Application: Follow manufacturers instructions. Clean and prepare surfaces. Apply 2 coats of Zinsser AllCoat by brush or spray to all areas to be decorated. Theoretical Coverage: 12 square meters per litre. Touch dry: 30 minutes. Hard dry: 7 days. Recoatable: 1 hour.
Zinsser Allcoat Exterior Gloss is available in 1 Litre, 2.5 Litre and 5 Litre tins, in white and black. It can also be mixed in 1 Litre, 2.5 Litre & 5 Litre tins to any British Standard, RAL, Little Greene, Farrow & Ball or NCS colour as a customised order (see above).
Note: Not suitable for flooring, or surfaces subject to water immersion. Drying and recoat times will be extended at lower temperatures. *Same day despatch applies for orders placed before 2pm on working days, and only where we have sufficiant stock available.
*Buy a 2.5L or 5L Zinsser Allcoat Mixed Colour and receive a 6 x 3ft Fossa Oxford Dust Sheet free of charge.
**Maximum one dust sheet per customer order. Offer end 31st August 2018.
Orders over £45.00 delivered FREE
All prices include VAT
Free Colour Cards