Junckers Pro Finish is a single-pack, water-borne polyurethane/acrylic lacquer. For internal pre-sealed, new, or sanded old wooden floors. A fast drying and curing lacquer, suitable for residential/domestic levels of traffic. Quick and easy to apply, UV stable, with minimal odour. Junckers Pro Finish is also suitable for lacquering all types of untreated internal wood trim.

As the largest manufacturer of high quality hardwood flooring in Europe, and its own complimentary specialist coatings plant, Junckers has 25 years experience in developing the very best coatings for wooden floors. You can rest assured that the new Junckers Pro Finish lives up to the Junckers name, providing the ideal minimal odour, quick to apply, durable water-based finish.

• High level of durability.
• Fast drying and minimal odour.
• Excellent flow, leveling and defoaming properties.

Coverage 10 square meters per litre (per coat). Drying times: Approximately 3 hours, maximum hardness achieved after 72 hours (at 20°C and normal drying conditions).

Apply using 100% Pure Wool Short haired roller -12 inch double arm frame preferred, or by block floor applicator, or brush (see links on the right hand side of the page). For customers who are inexperienced with using block floor applicators, short pile roller, or brush application are the easiest and safest method of application, if rather slower.

System Recommendations:
Bare untreated, sanded floors: 1 coat Junckers Prelak, 2 coats Junckers Pro Finish.
(On previously lacquered floors which have not been treated with wax or polish, it may be possible to prepare the original finish to accept 1-2 coats of Pro Finish directly - see the technical data sheet for guidance).

Available as a 5 Litre size, in clear Ultra Matt (10% Gloss Level), Matt (20% Gloss Level) & Semi-Gloss (50% Gloss Level) finishes.