KlimaTec Pro 4mm Thermal Lining Paper

KlimaTec Pro 4mm Thermal Lining Paper is a hi-tec composite energy-saving lining paper for interior use. Comprises a smooth non-woven facing surface welded to a dense knitted polyester fleece.

Interior walls and ceilings, which are covered with KlimaTec Pro, radiate thermal energy back into the room. This means that rooms warm up significantly faster, providing a comfortable working and living space in as little as a quarter of the normal warm-up time, and saving energy and money in the process. It's ideal for efficiently heating-up rooms with solid wall construction that are in intermittent, or irregular use.

  • Thickness: 4 mm.
  • Permanent energy saving.
  • Breathable and moisture regulating.
  • Reduces condensation and inhibits mould.
  • Covers over cracks.
  • Dimensionally stable.
  • Easy paste-the-wall application.
  • Suitable for allergy-sufferers.

Can be applied directly over slightly rough, cracked or damaged wall and ceiling surfaces.

Do NOT apply standard pulp based wallpapers or lining papers directly over KlimaTec Pro, without first over-papering with a non-woven lining paper. Standard pulp based wallpapers can shink during drying and will occasionally deform the KlimaTec Pro by lifting it at the seams.

We suggest over-papering with Wallrock Fineliner A50 which works out very economically at 1 meter wide and 50 meter long rolls. For easier stripping in the future, apply the Fineliner A50 with powdered paste, rather than readymixed emulsion adhesive. After you've over-papered the KlimaTec Pro with your chosen non-woven lining paper, you can wallpaper over it with any wallpaper, or decorative paint.

KlimaTec Pro's water vapour permeability conforms to DIN 52615, corresponding to a diffusion-equivalent air layer thickness of 0.02 meters. Roll dimensions: 15.00 meters long x 1.00 meter wide. Weight: approx. 600 g/m2

Application: Hang KlimaTec Pro perpendicularly, with each vertical length butt jointed to the next. Apply our Thermal Liner Adhesive directly to the wall, in an area slightly wider than the roll width (approx 3 inches wider). A single 10kg tub of Thermal Liner Adhesive is normally sufficiant for applying a single roll of KlimaTec Pro.
Place the wall covering onto the adhesive and press down with a wallpaper smoothing knife to smooth out any bubbles, to ensure that the adhesive is evenly distributed and that a flat base surface is produced. Press any excess material at the ceiling, skirtings, windows etc. with a plastic trowel into the corners and cut off with a hooked blade knife, Stanley type knife or strong scissors. Ensure that the wall covering does not overlap.

KlimaTec Pro 4mm Thermal Lining Paper is supplied in single rolls. Each roll is 1 meter wide x 15 meters long, and covers an area of 15 square meters.

single roll£130.75

*all prices include VAT

As low as
KlimaTec Pro 4mm Thermal Lining Paper

Use this product with: