Polyvine Pre-tinted Traditional Oil Scumble

Polyvine Pre-tinted Traditional Oil Scumble is a new pre-tinted semi-paste traditonal solvent-borne transparent oil glaze, with extended drying times to maintain your wet edge, and allow longer working times. Dries to a translucent gloss finish.

Use for producing wood graining and broken colour effects. The final shade achieved will be affected by the products consistancy at the time of application. This product now replaces Ratcliffe's Scumble which has been discontinued by the manufacturer.

It is not intended for use as a clear protective film. Once the coating has dried (minimum of 16 hours), the finish should be protected with at least two coats of varnish. Do not use polyurethane varnish on exterior work. Polyvine suggest using their Extra Pale Varnish Eggshell or, Extra Pale Varnish Eggshell Dead Flat for exterior use.  Due to its traditional formulation it has a natural tendency to yellow slowly on ageing and in conditions of darkness, or, yellow rapidly at elevated temperatures (e.g. radiators, hot water pipes).

Drying time approximately 24 hours minimum. These times are based on a temperature of 20°C, normal relative humidity and normal drying conditions. Do not apply if temperatures are below 10°C, especially in areas of low ventilation. Theoretical coverage 10-20 square meters per litre.

Also you might want to check out our range of graining brushes and tools.

Correct ground coat colours (below) are available in Eggshell Paint (see link on right hand side of page):

Scumble Colour Ground coat colour
Light Oak No 2 Chrome Buff
Medium Oak No 2 Chrome Buff
Dark Oak No 4 Mid Stone
Mahogany No 6 Mid Venetian
Teak No 10 Orange
Walnut No 6 Mid Venetian

 

Available in 500ml sized tins only.

Note: See technical data sheets for full information.

sizeprice
500 ml£15.59

*all prices include VAT