Professional Adjustable Wooden Mitre Block

Professional Adjustable Wooden Mitre Block made is a top quality professional wooden mitre box made from 3/4 inch laminated wood. Heavy duty construction, with rubber feet. Lergest size. Weighs 7 kg. Use it for creating mitres in ALL our decorative cornice and coving. Can be reused time and time again. Suitable for all coving up to 280mm (11 inch) across the ceiling and 223mm (8.75 inch) down the wall.

Instructions for use: Place your coving into the mitre block with the rear facing towards you, making sure that the edge that would be in contact with the ceiling is placed against the large side of the mitre box. (The edge that would be in contact with the wall should therefore be placed against the base of the mitre box). Adjust the metal base stops so that the distance between them and the large side of the mitre box is the 'length down the wall' of your coving. Make sure that the piece is positioned perfectly square. Tighten the finger nuts to hold the coving firmly in place.

Using a sharp panel saw cut down the slots at the desired angle down to the bottom. The cuts are set at 90, 45 and 22.5 degree angles. Take care not to keep sawing through the base. If you are a beginner at cutting mitres, keep offering the coving up to the ceiling and mark rough cut lines on the coving in pencil, this makes it easier to select the correctly angled mitre cut. We recommend that customers familiarise themselves with the process of cutting a mitre using some coving off-cuts first, particularly if they have little experience of cutting mitres.

Overall dimensions approx 400mm (long) x 330mm (wide), 350mm (high).

selling_qtyprice
single£90.81

*all prices include VAT

As low as
£90.81
Professional Adjustable Wooden Mitre Block