Sikkens Cetol HLS Plus Ext. Woodstain

Sikkens Cetol HLS Plus is a low build, solvent-borne, translucent satin finish exterior woodstain.

For use on smooth planed softwood and hardwood as a basestain to Sikkens Cetol Filter 7 Plus. Additionally Sikkens Cetol HLS Plus may be used as a three coat, 'stand alone' finish on rough-sawn timber, cladding or components subject to high levels of wear and abrasion, such as garden furniture, timber decking and handrails.

Coverage for each coat: 6 - 18 square meters per litre depending on surface condition and timber species. Touch dry in 3-5 hours, recoatable in 24 hours. These times are based on a temperature of 20°C, normal relative humidity and good drying conditions. Clean brushes and equipment with Paint Brush Cleaner - a water-soluble solvent cleaner. We always recommend applying a clear universal wood preservative to bare exterior timbers before overcoating, paying particular attention to cut end grain, this provides better protection against wood rotting fungi in the UK's wet climate.

Sikkens Cetol HLS Plus is available in 1 Litre, 2.5 Litre and 5 Litre sizes. The 'Plus' version denotes the latest formulation, which meets new EU VOC legislation.

Available in a traditional range of 15 natural wood colours (Ash Blonde, Dark Oak, Ebony, Hindelopen Green, Light Oak, Mahogany, Natural Oak, Olive Green, Opal White, Pine, Rosewood, Signal Red, Summer Blue, Teak and Walnut), and almost 100 other colours from the Cetol Design Classic Collection and the Cetol Design Style Collection.

You can order a free Sikkens colour card from the links on the right. Please note: Make sure you order the right colour, as this product is customised according to your colour requirements, cancellation restrictions apply.

5 litre£59.98

*all prices include VAT

As low as
Sikkens Cetol HLS Plus Ext. Woodstain