Sikkens Rubbol Primer Plus (previously known as Sikkens Onol) is a solvent-borne, opaque combined primer and undercoat suitable for exterior (or interior) use on timber and suitably primed metals and hard plastics.
It's available off the shelf in classic white, white and grey. We can also tint 1 litre sizes only to ANY Sikkens 4041 Color Concept Range, Sikkens Color Selection Range, British Standard or RAL colour. Just select the 'mixed colour' option from the drop-down box, then send us an email containing the colour you would like your Sikkens Rubbol Satura Plus to be tinted to. (Please note: mixed colours are customised according to your colour requirements, cancellation restrictions apply).
Theoretical coverage 14-15 square meters per litre. This may vary depending on the porosity and profile of the substrate. Touch dry in approximately 2-3 hours. Minimum overcoating interval 18 hours. These times are based on a temperature of 20°C, normal relative humidity and good drying conditions. Do not apply if temperatures are below 5°C.
Headline preparation: Always follow the manufacturers instructions. Surfaces to be decorated must be properly prepared, clean, dry, free from dust and dirt. Remove wax and degrease surfaces using Grax-it, or other suitable proprietory degreaser. Visible vegetable growth (mold and mildew etc.), must be removed and surfaces treated with a proprietory liquid to kill remaining spores. We always recommend applying a clear universal wood preservative to bare exterior timbers before overcoating, paying particular attention to cut end grain, this provides maximum protection against wood rotting fungi in the UK's wet climate. Clean brushes and equipment with Paint Brush Cleaner - a water-soluble solvent cleaner.
Sikkens Rubbol Primer Plus is available in 1L, 2.5L and 5L (2 x 2.5L) in White and Grey, and 1L in Classic White and Mixed Colours only.
Orders over £45.00 delivered FREE
All prices include VAT
Free Colour Cards