Heat Resisting General Purpose Aluminium Finish

Heat Resisting Aluminium Finish is a solvent-borne bright aluminium metallic finish for interior and exterior use on steelwork, pipework, storage tanks, gantries. Able to withstand dry heat temperatures up to 200°C

Its brilliant lustre is useful in preventing excessive temperature rise by reflecting solar heat. Apply by brush or roller

Bare Steel - Chip, scrape and wire brush to ST2 Swedish Standard, apply two coats of Heat Resisting Aluminium Finish.

Previously Painted Surfaces (standard decorative paints only) - All previously painted areas must be checked for adhesion of existing coatings. If unsound - remove and treat as bare. If sound apply apply two coats of Heat Resisting Aluminium Finish direct to cleaned prepared surface.

Do not apply in condensation conditions i.e. if the steel surface temperature is within 2 degrees of the dew point. A specialist primer may be required for Plastisol and Powder Coated substrates etc. to ensure adhesion. Touch dry in 4 hours, hard dry in 16 hours at 20°C and normal humidity. Theoretical coverage 12 square meters per litre, practical coverage approximately 10 square meters per litre. Heat Resisting Aluminium Finish is available in 1 litre, 2.5 litre and 5 litre sizes.

SizePrice
1 litre£15.28
2.5 litre£32.38
5 litre£60.27

*all prices include VAT

As low as
£15.28
Heat Resisting General Purpose Aluminium Finish