Stabilising Solution - Water-borne

Stabilising Solution is a quick drying, penetrating, clear, water-borne solution for application to friable or porous substrates, and chalking coatings to produce a substrate suitable for decoration.

  • Binds friable or chalking surfaces ready for painting
  • Controls suction, sealing porous surfaces such as bare plaster and render.

It is suitable for stabilising both exterior and interior surfaces, the penetrative and binding properties will also control suction, and seal surfaces often avoiding more costly preparation. Stabilising Solution is frequently specified prior to redecorating external bare masonry (concrete, roughcast, harling, render, pebbledash etc.), with masonry paint.

Note: A Primer Sealer should be used to prime areas of flaking material, following preparation.

Available in 5 Litre containers. Theoretical coverage is 9 square meters per litre, but should be reduced by at least 20% for practical purposes. You should not that coverage could be much lower, due to the porosity and profile of the substrate.

sizeprice
5 litre£29.92

*all prices include VAT

As low as
£29.92
Stabilising Solution - Water-borne