Water-based Epoxy Binder Sealer - 2 Pack

Two-pack, water-based epoxy binder sealer is a clear penetrating sealer for the stabilisation of bare or porous concrete surfaces prior to overcoating with our water-based epoxy floor paint system.

For more information on our Water-based Epoxy Floor Paint System, see the link on the right hand side of this page.

Theoretical coverage 10 square meters per litre. Practical coverage will vary depending on the porosity and profile of the substrate. Touch dry in approximately 4 hours. Minimum overcoating interval: 16 hours. Maximum overcoating interval: 7 days (it is important that the water-based epoxy binder sealer is overcoated with our Water-based epoxy floor paint within this time period to ensure a good chemical bond occurs between both coatings). These times are based on a temperature of 20°C, normal relative humidity and good drying conditions. Do not apply if temperatures are below 10°C, especially in areas of low ventilation.

Available as two components which when mixed together make 5.00 Litres.

sizeprice
5 litre£116.61

*all prices include VAT

As low as
£116.61
Water-based Epoxy Binder Sealer - 2 Pack