Wallrock Thermal Liner KV600

Wallrock Thermal Liner KV600 is a 4mm thick energy-saving composite lining paper for interior use which combines a smooth non-woven face, bonded to a insulating backing material.

When a room has been lined with Wallrock Thermal Liner KV600 it reflects warm air back into the room from the wall surfaces. Therefore, the maximum amount of heat is available to heat up the room air. Rooms warm-up much more quickly, and use less energy to do so. This is quite noticeable in homes with thermostatically controlled heating, in particular in older properties with solid wall construction which acts as a heat sink.

  • Thickness: 4mm.
  • Permanent energy saving.
  • Breathable and moisture regulating.
  • Reduces condensation and inhibits mould.
  • Covers over cracks.
  • Dimensionally stable.
  • Easy paste-the-wall application.
  • Suitable for allergy-sufferers.

Can be applied directly over damaged and cracked wall surfaces, bringing them back-to-flat. Produces a great base for non-woven wallpaper and lining paper. It's generally recommended that Wallrock Thermal Liner KV600 is papered over using one of our non-woven lining papers, such as Wallrock Fineliner A50 to produce the best finish, and for easier stripping in the future.

Do NOT apply standard pulp based wallpapers or lining papers directly over Wallrock Thermal Liner KV600, without first over-papering with any other non-woven lining paper. Standard pulp based wallpapers can shink during drying and will occasionally deform the Wallrock Thermal Liner KV600 by lifting it at the seams.

We suggest over-papering with Wallrock Fineliner A50 which works out very economically at 1 meter wide and 50 meter long rolls.  After you've over-papered the Wallrock Thermal Liner KV600 with your chosen non-woven lining paper, you can wallpaper over it with any wallpaper, or decorative paint.

Roll size: 15.00 meters long x 1.00 meter wide.

Application: Hang Wallrock Thermal Liner KV600 perpendicularly, with each vertical length butt jointed to the next. Apply our Thermal Liner Adhesive directly to the wall, in an area slightly wider than the roll width (approx 3 inches wider). 8-10kg of Thermal Liner Adhesive is normally sufficiant for applying a single roll of Wallrock Thermal Liner KV600.
Place the wall covering onto the adhesive and press down with a wallpaper smoothing knife to smooth out any bubbles, to ensure that the adhesive is evenly distributed and that a flat base surface is produced. Press any excess material at the ceiling, skirtings, windows etc. with a plastic trowel into the corners and cut off with a hooked blade knife, Stanley type knife or strong scissors. Ensure that the wall covering does not overlap.

Wallrock Thermal Liner KV600 4mm Thermal Lining Paper is supplied in single rolls. Each roll is 1 meter wide x 15 meters long, and covers an area of 15 square meters.


*all prices include VAT

As low as
Wallrock Thermal Liner KV600

Use this product with: