FREE DELIVERYOn orders over £40.00
ALL ORDERSSent using standard next working day courier
SAME DAY DESPATCHOn all orders
4 inch Microfibre Trim Paint Roller Sleeve
*all prices include VAT |
The 4 inch Microfibre Trim Paint Roller Sleeve is used for cutting-in, edging and trim work on smaller areas.
Thermofused to a 1.5 inch core, it will fit our 4 inch Trim Paint Roller Frame 1.5 inch Dia. Screw Fit. It's available in three different pile heights, extra short pile (1/4 inch), short pile (3/8 inch) and medium pile (9/16 inch). We advise you select sleeve's with the same pile height as your main paint roller for a more consistant finish.
Our Microfibre rollers produce a super smooth finish on walls and ceilings, with little shedding, and very low splatter, holds a tonne of paint too making, improving your productivity all round!
- Extra Short Pile (1/4in / 6mm) for smooth surfaces
- Short Pile (3/8in / 10mm) for smooth to semi-smooth
- Medium Pile (9/16in / 14mm) nap for smooth to semi-rough surfaces.
- Super smooth finish.
- Shed resistant.
- Very low splatter.
- Washes out easily.
- Thermofused fabric with solvent resistant core.
Ideal for applying all low and high sheen paints and stains, Emulsions, Acrylic's, Dead Flat Matt, and Gloss Enamels.
Use: Always pre-wet the Microfibre Paint Roller Refill Cover and spin dry before using water-borne coatings, this allows the cover to load and release paint quickly and evenly.
Cleaning: After use, immediately remove excess paint from roller with our USA sized roller scraper. Water-based coatings - wash in warm soapy water, rinse until clean, spin dry recommended using our USA sized Roller Spinner. Oil-based coatings - clean with recommened solvent according to the instructions on the outside of the paint can.
The 4 inch Microfibre Trim Paint Roller Sleeve is sold in singles, and packs of 3 rollers to save you even more.
Use this product with
