Browse our range of professional hand sanders, hand sanding tools for sanding plaster, wood, oak, pine, painted surfaces etc. Consider our range of Mirka hand sanding blocks with dust extraction, for dust free preparation of surfaces prior to decorating, using Mirka's Abranet Abrasive strips and sanding discs. Mirka supply a couple of starter Abranet hand sanding dust extraction kits for you to dip your toe in the water. These are ideal for sanding newly plastered walls and ceilings, and drywall joints.
Alternatively you may just wish to consider our standard range of professional grip pads with velcro hook and loop backing for quick and easy sanding strip changes in the most popular industry standard abrasive strip sizes, these are manufactured in hard and soft cellular foam, rubber and plastic, both double sided and single sided blocks and pads in ergonomic and comfortable designs for extended periods of use, or perhaps our traditional spring loaded decorators sander blocks which accept standard sanding paper and abrasives, and cut sanding rolls.
Investigate our sanding poles and heads which fit our full range of screw-fit extention poles, or our Ciros hand sanding machines which accept a wide range of standard 150mm hook n loop orbital sander discs.
Hand Sanding Tools, Sanding Blocks and Grip Pads
|
Aluminium Easy Grip Hand SanderProfessional aluminium hand sander with easy grip handle. Ideal for sanding large flat surfaces such as plaster and dry wall joints, timber and flush doors etc. 243 x 82mm solid aluminium plate. |
As low as
£5.56
Each
 |
|
Andy Sandy Combination Sanding Block Set4 piece hand sanding block set containing a variety of different clog resistant sanding blocks. Good for nasty projects with protruding nails and sharp objects where sandpaper might tear. The smaller sized blocks are useful in corners and other tight spaces. |
As low as
£12.58
Each
|
|
Circular Hand Sander Grip Pad for Mirka 150 mm discs.Highly flexible circular neoprene pad with velcro face and rear elasticated hand strap, which accepts any 150mm dia hook n loop abrasive sanding discs. Ideal for sanding rounded surfaces, internal coving, spindles and anything else you can wrap your hand around. |
As low as
£8.07
Each
|
|
Cork Sanding Grip Block 70 x 125Cork Sanding Grip Block for use with 70 x 125mm hook n loop abrasive sheets and strips including evoMESH, Abranet, Sianet etc. Lightweight cork hand sander block with contoured grip, comfortable for periods of extended use. Hook face for quick attachment and replacement of abrasive sheets and strips. |
As low as
£7.75
Each
|
|
Disc Hand Sanding Grip Block takes Mirka 150mm dia. DiscsSmooth white soft cellular foam hand held sanding block. Accepts 150mm dia hook an loop disks which are applied onto the face and wrap around both sides. Easier to keep clean, good for getting into corners, ideal for circular power sander users who already have existing stocks of discs. |
As low as
£9.90
Each
|
|
Double Sided Hand Sanding Grip Block for Mirka 70 x 125mm StripsTwo sanding blocks in one. Double sided, soft density foam on one side and medium density black foam on the other. Velcro / hook n loop faces on both sides. Takes 70 x 125mm sanding strips such as Fossa evoMESH, Abranet and Mirka Q Silver. |
As low as
£6.87
Each
|
|
Ergonomic Hard Hand Sanding Grip Block 70 x 125mmHard dense cellular foam sanding block in a comfortable design. Smooth surface finish for easy cleaning. Velcro / Hook n Loop face which accepts all 70 x 125mm grip strips such as Fossa evoMESH, Mirka Q Silver or Abranet abrasives. |
As low as
£7.58
Each
|
|
Flexible Hand Sanding Grip Block for Mirka 70 x 125 mm StripsFlexible hand held sanding grip block with velcro hook and loop face for easy attachment of Fossa evoMESH®, and Mirka 70 x 125mm Grip sheets & strips i.e. Q-Silver, Abranet etc. Soft contoured grip, extremely lightweight and comfortable cellular foam block. |
As low as
£7.67
Each
|
|
Fossa Dust Extraction Hand Sanding Block 70x125mmFossa Dust Extraction Hand Sanding Block 70x125mm. Use with dust extraction equipment to massively reduce sanding dust in the work environment. Accepts any hook-n-loop abrasive. Ideal for use with Fossa evoMESH®. 15 hole base plate. Comfortable soft textured hand grip. Standard swivel 20mm hose connector. Also supplied with 20 to 28mm adaptor. Supplied in singles. |
As low as
£10.95
Each
|
|
Fossa Dust Extraction Hand Sanding Starter Kit 70x125mm (inc Hose / 30 evoMESH Sheets).Dust Extraction Hand Sanding Starter Kit includes 70 x 125mm dust extraction hand sanding block with 20mm swivel connector, 20-28mm adaptor, 20mm x 4m vacuum hose and 30 mixed sheets of Fossa evoMESH® 10 x P80, 10 x P120, 5 x P180, and 5 x P240. |
As low as
£37.42
Each
|
|
Fossa Pad Protector 150mm / 67 holeFossa Pad Protector Enables smooth and stable sanding. The Pad Saver prevents the hook n loop disc backing pad from rapid wear out. In effect, it is a sacrificial hook n loop layer, which is far cheaper to replace than the whole backing pad. 150mm dia. / 67 hole. |
As low as
£3.60
Each
|
|
Fossa Pad Protector Blank Disc Set 5in / 125mmDIY 5in/125mm Fossa Pad Protector Blank Disc Set, contains 2 x hole cutters and 1 x blank, hook n loop pad saver, so you can punch your own hole pattern to match the hole pattern of your sanders backing pad. The Pad Saver prevents the expensive hook n loop disc backing pad on your sander from rapid wear out. In effect, it is a sacrificial hook n loop layer, which is far cheaper to replace than the whole backing pad. Additional blank pad savers can be purchased separately. |
As low as
£8.98
Each
|
|
Fossa Pad Protector Blank Disc Set 6in / 150mmDIY 6in/150mm Fossa Pad Protector Blank Disc Set, contains 2 x hole cutters and 1 x blank, hook n loop pad saver, so you can punch your own hole pattern to match the hole pattern of your sanders backing pad. The Pad Saver prevents the expensive hook n loop disc backing pad on your sander from rapid wear out. In effect, it is a sacrificial hook n loop layer, which is far cheaper to replace than the whole backing pad. Additional blank pad savers can be purchased separately. |
As low as
£9.45
Each
|
|
Fossa Pad Protector Blank Discs 5in / 125mmSpare blank padsaver discs for use with the Fossa Pad Protector hole cutters. Punch out any hole pattern, to match the pattern of holes on your Festool, Mirka etc. disc sander backing pad. |
As low as
£2.41
Each
|
|
Fossa Pad Protector Blank Discs 6in / 150mmSpare blank padsaver discs for use with the Fossa Pad Protector hole cutters. Punch out any hole pattern, to match the pattern of holes on your Festool, Mirka etc. disc sander backing pad. 6inch/150mm discs. |
As low as
£2.63
Each
|
|
Fossa Sanding Block Kit 70x125mm with 5 x evoMESH sheetsFossa Sanding Block Kit comprises a 70 x 125mm soft and flexible contoured grip, hook and loop hand sanding block, together with 5 assorted sheets of Fossa evoMESH 70 x 125 mm in the most popular grades P80, P120, P180 and P240. |
As low as
£4.14
Each
|
|
FP 150mm Replacement Disc Sander Backing Pad Firm (Grey/Black)Replacement hook n loop backing pad suitable for dust extraction sanders like Mirka Ceros. Accepts evoMESH and all other hook-n-loop sanding abrasives. Maximum 12,000 RPM; Weight 150g Firm density; 51 Hole Dust Extraction; 5/16 in. screw Fitting. Low profile. |
As low as
£25.00
Each
|
|
FP 150mm Replacement Disc Sander Backing Pad Medium (Yellow/Blue)Replacement hook n loop backing pad suitable for dust extraction sanders including Mirka Ceros. Accepts Fossa evoMESH and all other hook-n-loop sanding abrasive discs. Maximum 12,000 RPM; Weight 150g Medium density; 51 Hole Dust Extraction; Both a 5/16 inch and M8 screw fitting are provided. Standard profile. |
As low as
£0.00
Each
|
|
FP Cyclone 150mm / 6in 53 Hole Medium Grip Backing PadFP Cyclone 150mm / 6in 53 Hole Medium Firm, Sander Grip Backing Pad. Hollow chamber and vortex design aid even suction across the pad. Directly accepts Festool, evoMESH, Abranet & Sianet mesh abrasives. Supplied with both 5/16th thread, and M8 thread fixings. |
As low as
£29.56
Each
|
|
FP Cyclone 150mm / 6in 53 Hole Soft Grip Backing PadFP Cyclone 150mm / 6in 53 Hole Soft, Sander Grip Backing Pad. Hollow chamber and vortex design aid even suction across the pad. Directly accepts Festool, evoMESH, Abranet & Sianet mesh abrasives. Supplied with both 5/16th thread, and M8 thread fixings. |
As low as
£29.56
Each
|
|
Gripper Buddy - Carpet Gripper Rod Protector60cm (2ft) long flexible thermoformed cover, safely isolates sharp carpet gripper rods, when sanding, scraping and abrading skirting boards and other decorative trim. It's natural design allows you to prepare surfaces in the same way as normal, but now you can can avoid damage to your hands, and prepare surfaces faster, and more effectively. |
As low as
£6.89
Each
|
|
Hand Sanding Block with Metal Spring ClipsTough moulded hand sanding block with sprung metal clips to hold abrasive sanding paper firmly in place, gives a better finish on flat surfaces and avoids raw finger ends. Dense cellular foam underside to ensure even contact with the surface being abraded. |
As low as
£7.48
Each
|
|
Hook n Loop Hand File KitHook n Loop nylon hand file kit plus 3 assorted abrasives in P60, P120, P180 grade. Ideal for low pressure sanding and grinding of wood, filler, lacquer, primer and metal. Replacement strips available. Overall file length 235mm. |
As low as
£9.32
Each
|
|
Interface Pad 150mm Disc 11mm / 21 Hole11mm flexible soft foam interface pad with 21 holes suitable for use with ALL our hook n loop dust extraction disc backing pads including Mirka Abranet / Autonet / CEROS backing pads. Ideal for sanding rounded surfaces and contours. |
As low as
£7.18
Each
|
|
Lightweight Cool Grip Hand SanderLight weight but tough ABS plastic hand sander with chunky, soft cool-grip grip handle. Ideal for sanding large flat surfaces such as plaster and dry wall joints, timber and flush doors etc. 243 x 82mm ABS plastic plate. |
As low as
£11.90
Each
|
|
Mirka Abranet Dust Extraction Starter Kit - 70 x 198 mm BlockContains Mirka's most popular 70 x 198mm dust extraction hand sanding block, together with a 10 mm interface pad for non-flat surfaces. A 4 meter dust extraction hose with adaptor, and 5 x strips of Mirka Abranet for you to get started with dust free sanding. |
As low as
£34.66
Each
|
|
Mirka Abranet Sanding Grip Block Kit 3 Strips (70x125 Block, P120, P180, P240)Mirka Abranet kit comprises a 70 x 125mm soft/medium, flexible contoured grip hook & loop hand sanding block, together with 3 mixed strips of Mirka Abranet 70 x 125 mm in the most popular grits P120, P180 and P240. |
As low as
£8.34
Each
|
|
Mirka CEROS 150mm Replacement Abranet Backing PadReplacement hook n loop backing pad for Mirka's range of dust extraction sanders when using Mirka net sanding products. Maximum 13,000 RPM; Weight 130g Medium density; 51 Hole Dust Extraction; 5/16 in. Screw Fitting. Supplied complete with a matching 150mm Pad Saver Disc to increase the life of the backing pad. |
As low as
£41.49
Each
|
|
Mirka Curved Pad for 70 x 125mm Hand Sanding BlockCurved sanding pad adaptor. Converts Mirka's flat faced 70 x 125mm hook n loop sanding block into a curved face. Ideal for high speed sanding and preparation of concave surfaces like gyproc coving. Rcommended for use with Mirka net sanding products like Abranet, to get the full benefit of dust free sanding. |
As low as
£11.39
Each
|
|
Mirka Curved Pad for 70 x 198mm Hand Sanding BlockCurved sanding pad adaptor. Converts Mirka's flat faced 70 x 198mm hook n loop sanding block into a curved face. Ideal for high speed sanding and preparation of concave surfaces like gyproc coving. Rcommended for use with Mirka net sanding products like Abranet, to get the full benefit of dust free sanding. |
As low as
£13.99
Each
|
|
Mirka Half Round Hand Sanding PadThe rounded edge of this half round hand sanding pad is ideal for sanding intricate concave mouldings like dado, cornice, coving and wooden mouldings. Takes any 150mm/6 inch diameter hook n loop sanding disc. Size150 x 77mm |
As low as
£4.72
Each
|
|
Mirka Hand Dust Extraction Hose 20mm dia x 4 metersFlexible dust extraction hose for use with all of Mirka's hand sanding blocks with 20mm connections. The universal adaptor fitted to one end, allows the hose to connect to a range of other vacuum extraction machines. |
As low as
£13.99
Each
|
|
Mirka Hand Dust Extraction Hose Adaptor 20 - 28 mmAllows you to connect your existing Mirka 28mm dust extraction hose directly to any Mirka dust extraction hand sanding block. Push on adaptor. |
As low as
£9.93
Each
|
|
Mirka Hand Dust Extraction Hose Swivel Adaptor 20 - 20 mmConnect two (or more) hand dust extraction hoses together using this swivel adapter. Ideal for when you need extra length when working at heights. Both ends of the adaptor have female threads to allow Mirka's 20mm hose to screw directly into them, and both ends swivel independently. |
As low as
£31.36
Each
|
|
Mirka Hand Dust Extraction Hose Swivel Adaptor 20 - 25.4 mmAllows you to connect a Mirka 20mm dust extraction hand sander hose to your existing 25.4mm dust extraction equipment. Both ends of the adaptor have female threads to allow the respective hoses to screw directly into them, and both ends swivel independently. |
As low as
£30.14
Each
|
|
Mirka Hand Dust Extraction Sanding Block 70 x 125 mmSmaller, 13 hole hand dust extraction sanding block, size 70 x 125mm. Ideal for smaller surfaces and difficult-to-reach areas. Use with any sanding strips that use a hook n loop fastening system. Most effective when used with Fossa evoMESH or Abranet. 20mm hose connection incorporates an adjustable suction valve. Supplied with a 20/28mm adaptor. |
As low as
£19.99
Each
|
|
Mirka Hand Dust Extraction Sanding Block 70 x 198 mmMedium sized, 22 hole hand dust extraction sanding block, size 70 x 198mm. Ideal for general purpose use. Use with any sanding strips that use a hook n loop fastening system. Most effective when used with Abranet. 20mm hose connection incorporates an adjustable suction valve. Supplied with a 20/28mm adaptor. |
As low as
£10.62
Each
|
|
Mirka Hand Dust Extraction Sanding Grip Block 115 x 230mmLarge, 36 hole hand dust extraction sanding block, size 115 x 230mm. Ideal for larger flat surfaces walls and ceilings. Use with any sanding strips that use a hook n loop fastening system. Most effective when used with Abranet. 20mm hose connection incorporates an adjustable suction valve. Supplied with a 20/28mm adaptor. |
As low as
£24.95
Each
|
|
Mirka Handy Abranet Dust Extraction Starter Kit - 80 x 230 mmKit includes everything you need to get started with dust-free sanding (apart from the vacuum / dust extraction machine). Set includes Mirka's 80 x 230 mm Handy hand sanding block; a 4 meter hose; and 5 strips of Abranet 80 x 230mm. |
As low as
£33.98
Each
|
|
Mirka Handy Hand Dust Extraction Sanding Grip Block 80 x 230mmLightweight and comfortable dust extraction sanding block with handle, which weights only 250g. Allows a more secure one, or two handed grip that avoids tilting. Suits the sanding of flat surfaces such as walls and ceilings. Specifically for use with Mirka's Abranet range of sanding abrasives for dust free sanding. |
As low as
£20.30
Each
|
|
Mirka Interface Pad 10mm for 150mm / 67 hole Disc Sander10 mm thick, 67 hole, soft foam disc interface pad fits between your backing pad, and your hook n loop sanding abrasive. Improves the abrasives ability to deform to match the surface you are sanding, ideal for sanding rounded surfaces and contours. |
As low as
£9.07
Each
|
|
Mirka Interface Pad 5mm for 150mm / 67 hole Disc Sander5 mm thick, 67 hole, soft foam disc interface pad fits between your backing pad, and your hook n loop sanding abrasive. Improves the abrasives ability to deform to match the surface you are sanding, ideal for sanding rounded surfaces and contours. |
As low as
£8.81
Each
|
|
Mirka Interface Pad 81 x 133 mm / 54 Hole8 mm thick, 54 hole, soft foam interface pad fits between the backing pad of your Mirka or Festool RTS 400 compact sander range, and your hook n loop sanding abrasive. Allows the abrasive to deform to match the surface you are sanding, ideal for sanding rounded surfaces and contours. |
As low as
£10.39
Each
|
|
Mirka Interface Pad for 115 x 230mm Hand Sanding Block10 mm thick, 32 hole, soft foam interface pad fits between your dust extraction hand sanding block, and your hook n loop sanding abrasive. Allows the abrasives to deform to match the surface you are sanding, ideal for sanding rounded surfaces and contours. |
As low as
£0.00
Each
|
|
Mirka Interface Pad for 70 x 125mm Hand Sanding Block10 mm thick, 13 hole, soft foam interface pad fits between your dust extraction hand sanding block, and your hook n loop sanding abrasive. Improves the abrasives ability to deform to match the surface you are sanding, ideal for sanding rounded surfaces and contours. |
As low as
£7.11
Each
|
|
Mirka Interface Pad for 70 x 198mm Hand Sanding Block10 mm thick, 56 hole, soft foam interface pad fits between your dust extraction hand sanding block, and your hook n loop sanding abrasive. Improves the abrasives ability to deform to match the surface you are sanding, ideal for sanding rounded surfaces and contours. |
As low as
£5.18
Each
|
|
Mirka Interface Pad for 80 x 230mm Handy Sanding Block7 mm thick, 55 hole, soft foam interface pad fits between your Mirka 'Handy' dust extraction hand sanding block, and your hook n loop sanding abrasive. Allows the abrasive to deform to match the surface you are sanding, ideal for sanding rounded surfaces and contours. |
As low as
£11.04
Each
|
|
Mirka Pad Saver Disc 150mm / 57 holeMirka Pad Saver Disc 150mm / 57 hole enables smooth and stable Abranet sanding. The Pad Saver prevents the disc backing pad from rapid wear out. In effect, it is a sacrificial hook n loop layer, which is far cheaper to replace than the whole backing pad. 150mm dia. / 57 hole. |
As low as
£6.28
Each
|
|
Mirka Pad Saver Disc 150mm / 67 holeEnables smooth and stable Abranet sanding. The Pad Saver prevents the disc backing pad from rapid wear out. In effect, it is a sacrificial hook n loop layer, which is far cheaper to replace than the whole backing pad. 150mm dia. / 67 hole. |
As low as
£6.71
Each
|
|
Mirka Pad Saver Strip for 70 x 198mm Sander / 56 HolePrevents the backing pad from rapid wear out. 56 Hole, sacrificial hook n loop layer, which is far cheaper to replace than the whole backing pad, or hand sanding block. Designed for use with Mirka's 70 x 198mm orbital sanders, but can also be used with their 70 x 198mm Dust Extraction Hand Sanding Block. |
As low as
£4.34
Each
|
|
Mirka Pad Saver Strips 81 x 133 mm / 54 HolePrevents your backing pad from rapid wear out. 54 Hole, sacrificial hook n loop layer, which is far cheaper to replace than the whole backing pad. Use with Mirka orbital sanders, and Festool RTS400 80 x 130mm compact sanders - hole pattern aligns prefectly. |
As low as
£6.51
Each
|
|
Pad Saver Disc 150mm / 21 hole21 hole Pad Saver suitable for ALL our dust extraction 150mm backing pads including Mirka / Abranet / Autonet / Ceros. The Pad Saver protects the backing pad from rapid wear out. In effect, it is a sacrificial hook n loop layer, which is far cheaper to replace than the whole backing pad. |
As low as
£5.06
Each
|
|
Pad Saver Disc 150mm / 51 hole51 hole Pad Saver fits ALL our 150mm backing pads including Mirka / Abranet / Autonet / Ceros. The Pad Saver protects the backing pad from rapid wear out. In effect, it is a sacrificial hook n loop layer, which is far cheaper to replace than the whole backing pad. |
As low as
£5.06
Each
|
|
Proform Nail Set - Various sizes.Hammer down any loose or raised nails, below the surface of the timber, prior to sanding and filling. Avoid damaging your abrasive sanding paper, and get a better finish when filling. Fitted with Proforms patented NailWing holding tool. 1/32 inch, 2/32 inch and 3/32 inch sizes |
As low as
£2.42
Each
|
|
Proform Nail Set 3 pc Set plus Center Punch3 piece set plus free center punch. Hammer down loose or raised nails, below the surface of the timber prior to sanding and filling. Avoid damaging your abrasive sanding paper, and get a better finish when filling. Fitted with Proforms patented NailWing holding tool. Set includes 1/32 inch, 2/32 inch, 3/32 inch sizes plus free center punch. |
As low as
£6.12
Each
|
|
Sanding Pole Swivel Head - Black ABS Plastic238 x 84 mm lightweight ABS plastic sanding pole for sanding walls, ceilings and floors and other flat surfaces. Fits to any of our screw-fit extension poles. Abrasive sanding paper is simply clipped into place. Super-light, but strong construction. |
As low as
£11.18
Each
|
|
Sanding Pole Swivel Sander Head (Cast Aluminium 240 x 84 mm)Traditional sanding pole swivel sander head for sanding walls, ceilings and floors and other flat surfaces. Abrasive sanding paper is simply clipped into place. Superior cast aluminum construction which is strong but light. 240 x 84 mm. |
As low as
£8.94
Each
|
|
Wooster AeroSanderLightweight triangular shaped, 360 degree swivel pole sander head for sanding walls and ceilings. Designed for improved speed and control - won't flip and gouge surfaces. Velcro hook and loop fastener for easy sandpaper changes. Fits screw-fit extension poles. |
As low as
£0.00
Each
|
