Mirka Hand Dust Extraction Sanding Block 70 x 198 mm

Mirka's Hand Dust Extraction Sanding Block 70 x 198mm / 22 holes, is their most popular medium sized vacuum block, suitable for most general purpose uses. It allows you to hand sand wood, paints and coatings, plaster and drywall, whilst you collect the sanding debris with a dust extraction vacuum.

Designed for use with Mirka's Abranet, Autonet and Abranet Eco range of net abrasives, it can however be used with any abrasive sanding sheets or strips that use a hook n loop / Velcro type fastening system.

Dust and debris are removed through 22 holes in the sanding tool directly to a vacuum cleaner which makes the job easier and quicker because time isn’t spent protecting the surroundings from dust contamination. It makes the sanding of surfaces, walls and ceilings faster, more effective and dust-free.

When  attached to a dust extraction vacuum, you'll find that you only need to use light pressure because the sanding tool is drawn by suction towards the surface when sanding. The blocks 20mm hose connection incorporates an adjustable suction valve to allow for optimised dust extraction and air flow. This allows the tool move easily over the surface. The block also comes complete with a 20/28mm adaptor, which allows direct attachment to Mirka's Ceros and Deros hoses.

It's worthwhile buying a matching interface pad (see links on right hand side of page) for this block as well.

This hand sanding block is also available in a starter kit, that comes complete with a 4 meter hose, and 5 sample strips of Abranet. This may work out a little cheaper than buying the items separately, and is recommended as the 4 meter hose is fitted with a conical adaptor that allows connection with many common vacuum dust extraction machines.

Mirka's Hand Dust Extraction Sanding Block 70 x 198 mm is sold in singles and packs of 2 blocks to save you even more.

Selling_qtyPrice
single£10.52
pack of 2£20.81

*all prices include VAT