Junckers Basefill

Junckers BaseFill is a single-pack, extremely fast drying solvent-based filler which fills up gaps, cracks and knots up to 2mm wide on internal timber floors when mixed with sanding dust. May be overcoated with all Junckers floor coating systems.

Coverage is difficult to estimate because it is dependent on the condition of the floor, but allow a maximum coverage of 10 square meters per litre. Drying times: Approximately 20-90 minutes, maximum hardness in 24 hours (at 20&degC and normal drying conditions). Apply using a broad bladed filling/smoothing knife etc. When using Junckers BaseFill, mix enough sanding dust into Junckers BaseFill until a thick but spreadable paste is obtained.

Available in 5 Litre size only.

5 litre£70.56

*all prices include VAT

As low as
Junckers Basefill

Further information: