
Junckers High Performance Friction Plus (Friction+) is a new slip-resistant two-pack, water-borne polyurethane lacquer / varnish. For use as the finishing coat only, on prefinished or untreated, newly installed or machine sanded wooden floors in commercial areas with high levels of traffic and extreme wear. It is ideal for use as the finishing coat in areas where wet slip resistance is a high priority, and exceeds the requirements BS7976-2 TM2002. Junckers HP Friction Plus has a rough profiled surface and is recommended for fitness centres, aerobic centres, bars and restaurants etc. where sweat or drinks spillages can make the floor slippery. Note: Friction Plus is not recommended for areas where ball-sports or contact-sports are practised. Low-odour, Quick drying, clear Ultra-Matt finish.
Coverage 10-12 square meters per litre (per coat). Drying times: Touch dry in approximately 2-3 hours. Recoat time: 2-3 hours. Ready for use after 8 hours; Maximum hardness achieved after 72 hours; (at 20°C and normal drying conditions). Pot-life: The mixture should be used within 2 hours. Apply using 100% Pure Wool Short haired roller -12 inch double arm frame preferred, or by block floor applicator, or brush (see links on the right hand side of the page). For customers who are inexperienced with using block floor applicators, short pile roller, or brush application are the easiest and safest method of application, if rather slower.
|
As low as
![]() Further information:Use this product with: |
Orders over £45.00 delivered FREE
All prices include VAT
Free Colour Cards