Keen Spray Paint Metal Primer is a grey coloured, all-purpose Zinc Phosphate based rust inhibiting primer which is suitable for priming all ferrous metals, most non-ferrous metals, and/or bare wood, prior to overcoating with Keen Advantage XL2 Spray Paint when required. Remove wax and degrease surfaces using Grax-it wax remover and degreaser. Not suitable for use on plastic (use Keen Plastic Primer) or galvanised metal surfaces instead consider Zinsser BIN Aerosol

NOTE: Use Keen Vantage White Matt where you need a white coloured primer for use on non-ferrous surfaces only, and not ferrous surfaces, as it contains no rust inhibitors.

Keen Spray Paint Metal Primer cans are fitted with, self-cleaning valve's, safety cap, use genuine 15 bar resistant containers, and ozone safe propellant. Coverage approximately 2 square meters per can. Touch dry in 10 minutes, fully through-dry in 24 hours. These times are based on a temperature of 20°C, normal relative humidity (60% RH) and good drying conditions. Do not apply if temperatures are below 15°C, especially in areas of low ventilation. Don't use on polystyrene surfaces.