WSE Primer and Adhesion Promoter is a high performance water-based, two component epoxy coating which contains no volatile organic compounds. We can't praise this product too highly, it performs superbly in the worst conditions and on the toughest surfaces. If your require a no-compromise primer and adhesion promoter for the surfaces listed below you won't be disappointed.

• Use as an industrial grade adhesion promoter for non-porous substrates such as ceramic tiles, engineering brick and aged anti-graffiti/hard glossy coatings.
• Use as a barrier coat against bitumen or graffiti.
• Use as a primer sealer for porous substrates such as plaster, concrete or render.

Supplied as a base and activator in correct proportions to make 5 litres. Available in White only. Theoretical coverage up to 10 square meters per litre per coat. Practical coverage typically 8 square meters per litre per coat. Touch dry in 4 hours, hard dry in 16 hours at 20°C. Remove wax and degrease surfaces using Grax-it, or other suitable proprietory degreaser.