FREE DELIVERYOn orders over £40.00
ALL ORDERSSent using standard next working day courier
SAME DAY DESPATCHOn all orders
Airtight Non-Woven Membrane Tape
*all prices include VAT |
CLICK & COLLECT
Middlesbrough
Commerce Way, TS6 6UR
DELIVERY AVAILABLE
Airtight, non-woven adhesive tape - with very strong permanent adhesion. For joining, sealing overlaps, sealing connections, or repairing holes or tears in films, non-woven breather fabrics and building membranes (PP).
Suitable for use on polyethylene, polypropylene films, nonwovens, PP menbranes, steel, glass, foamed EPS, and sound, dry, suitably prepared and primed porous surfaces like cement, plaster, timber, brick, stone.
Manufactured with a very strong special rubber-based permanent adhesive, on a robust Non-woven fabric backing, with a double sided silicone liner/release paper.
We recommend this nonwoven tape for retrofit insulation projects, like sealing off a suspended wooden floor (see photos). We use it for sealing joins and overlaps in the roofing membrane used between the joists, and also for sealing the roofing membranes edges to the prepared/primed brick/cement walls around the perimeter of the room - to make them airtight. Amazing stuff, incredible adhesion.
| Tensile Strength: | 28.00 N/10mm |
| Adhesive Strength to Steel (after 20 minutes): | 18.00 N/10mm |
| Elongation: | 50% |
| Service Temperature: | 5 - 75 deg C |
Vapour Permeable, Non-Woven airtight adhesive tape is available in 50mm / 2inch roll width. Each roll contains 25 meters of tape, and is supplied individually shrink wrapped.
