FREE DELIVERYOn orders over £39.00
ALL ORDERSSent using standard next working day courier
SAME DAY DESPATCHOn all orders
Zinsser Allcoat Satin Anthracite Grey All Surface Paint
*all prices include VAT |
CLICK & COLLECT
Middlesbrough
Commerce Way, TS6 6UR
DELIVERY NOT AVAILABLE
Zinsser Allcoat Exterior Satin Anthracite Grey is a genuine low-maintenance exterior satin-finished, water-borne coating, which rather unusually, can be applied to virtually all exterior surfaces without using a separate primer.
It's an ideal product for specifiers and building maintenance professionals, who need to reliably specify a high performance coating system on important exterior projects with lots of different surface types.
Use directly onto wood, plastics, uPVC, galvanised metal, cladding, concrete, brick, stone. Even directly over weathered coatings like bitumen, tar varnish or creosote. It offers fantastic adhesion, so will stick to glossy surfaces without any need to abrade them. (Note: Ferrous metals i.e. Iron/Steel which might rust etc. will need to be primed with one of our a rust inhibiting primers first). Remove wax and degrease all surfaces to ensure adhesion of the coatings to the substrate. Don't use a bristle paint brush to apply, instead use a good quality synthetic paint brush like the excellent Fossa ViperTrim, which is lovely to use and will give you a good finish.
Zinsser Allcoat Exterior Anthracite Grey offers good moisture vapour permeability, which allows moisture to leave the substrate and pass through the coating film at higher rates, without blowing off the coating film. Quick drying times allow also it to be recoated in as little as 1 hour.
Zinsser Allcoat Exterior's water-borne formulation provides excellent resistance against cracking, blistering and flaking. The tough flexible finish is resistant to rain and severe weather and it offers excellent colour retention, so that strong colours remain bright and beautiful for longer.
It's available to collect TODAY from our large Middlesbrough warehouse
We won't start mixing your paint until after you have arrived and have paid for your order at our Middlesbrough warehouse - so there is no commitment from you to go ahead, until you are completely happy.
Application: Follow manufacturers instructions. Clean and prepare surfaces. Apply 2 coats of Zinsser AllCoat by brush or spray to all areas to be decorated. Theoretical Coverage: 12 square meters per litre. Touch dry: 30 minutes. Hard dry: 7 days. Recoatable: 1 hour.
Zinsser Allcoat Exterior Satin is also available in 1L, 2.5L and 5L tins, in white and black. It can also be mixed in 1L, 2.5L and 5 Litre tins to any British Standard, RAL, NCS, Little Greene or Farrow & Ball colour, and ready for collection today. It's also also available in a Gloss finish and a Matt finish.
Note: Not suitable for flooring, or surfaces subject to water immersion. Drying and recoat times will be extended at lower temperatures.
