Prestonett Quick Dry Exterior Filler

Prestonett Quick Dry Exterior Filler is a professional powder filler which dries white, and can be overcoated in just 3 hours with any decorative paint without flashing. It's an excellent alternative to Toupret fillers, and does not shrink or crack. Use for filling gaps, cracks and damage on exterior facades.

Prestonett Quick Dry Exterior Filler, fills holes, cracks and gaps up to 40mm application thickness. It's quick and easy to mix, offers good adhesion and trowelling properties, and is particularly easy to sand. It can be be overcoated with any standard paint or wallpaper.

  • Exterior use.
  • Can be applied to damp substrates.
  • Quick drying allowing faster overcoating.
  • For filling holes, cracks and gaps.
  • Can be applied up to 40mm thick.
  • Good adhesion.
  • Quick and easy to mix.
  • Good trowelling properties
  • Easy to sand
  • White

Dilution ratio: 0.32 Litre of water to 1 kg of powder filler. Gradually pour the powder into water, stirring until a homogeneous paste is obtained. Leave the paste to stand for a short time before using. Working time: 30 minutes. Coverage: 0.9kg of powder fills a volume of 1 litre. Drying Time: A 40mm application will take a minimum of 3 hours to dry in good drying conditions.

Application: Fill the cavity thoroughly, taking care to line the bottom while expelling any air, and level the surface with the surrounding substrate. Do not apply when air or substrate temperatues are below 5 deg C., or above 80% Relative Humidity. Do not apply in direct sunlight.

Use on: fine-grain concrete, concrete, cellular concrete, cement, concrete block, brick, plaster, plasterboard, ceramic tiles, stone, and prepared old paint substrates. Preparation: Substrates must be hard, cohesive, clean, sound and dry.

Prestonett Quick Dry Exterior Filler is available in 1kg boxes (which contain 1 x sealed 1kg plastic bags of filler).

single box£7.97
carton of 6£43.85

*all prices include VAT

As low as
Prestonett Quick Dry Exterior Filler

Further information: