Ultra Aseptic Coating is a unique independently tested Silver Ion based hygiene coating formulated to fight bacteria and mould in food processing areas; kitchens; hospitals, laboratories, pharmaceutical production areas and air conditioning systems.
This single pack, quick-drying, low-odour, water-borne anti-bacterial coating system reduces bacteria and mould by 99.99%, and offers a highly durable, smooth eggshell finish with excellent resistance to cleaning chemicals, solvents, impact and abrasion. Formulated with active Silver Ion technology to kill or inhibit bacterial and fungal growth for many years. Conventionally painted surfaces can support large colonies of harmful bacteria and fungal growth, which in some cases can feed off the paint film, Ultra Aseptic reduces bacteria and mould by 99.99%.
Ultra Aseptic Coating can be applied to new, bare, stripped and previously painted internal surfaces including plaster, plasterboard, masonry, brick, concrete and ceramic tile. Ideal for use in environments with high humidity.
A wide variety of bacteria and microfungi can be kept under control, including pathogenic species associated with wound sepsis, general infections, food poisoning, dysentery and diphtheria and fungi species from food and brewing production areas. Effective against MRSA, Salmonella, E.Coli and other forms of bacteria and mould.
Critical and high risk areas can be effectively protected with Ultra Aseptic Coating including:
- Operating Theatres
- Intensive Care Units
- Leisure facilities
- Prison cells
- Food Processing and Storage Areas
Brewing and Food Processing
- Production and Storage
- Yeast Culture Process Areas
- Raw Material Storage and Process Plants
Application: Where required, prime new, bare stripped or hard glossy surfaces with WSE Adhesion Primer. Apply 2 coats of Ultra Aseptic to prepared, previously painted surfaces. When applying over existing dark colours, a third coat may be necessary.
Available in a White and a selection of pastel BS4800 colours in 5 litre sizes only. Theoretical coverage 10 square meters per litre. Practical coverage: typically 8 square meters per litre. Drying Times: Touch dry in 2 hours, hard dry in 4-6 hours at 20°C. Overcoating interval: Minimum: 7 hours; Maximum: 7 days.